117S e t u p116S e t u pRestrictThis feature allows you to restrict outgoing callsfrom your phone except emergency calls by thehard-coded emergency numbers (911, *911 and #911)or three programmed emergency numbers (Menu 9-9-4). Once you restricted the phone, storing a numberis also unavailable.Select Yes to turn this feature on or No turn it off.Lock CodeThis feature allows you to change your current lockcodeto a new one. The lock code is preset to 0000at factory.Enter a new, four-digit lock code and enter the codeonce again at a prompt.Note: Your phone does not allow viewing of the lockcode for security reason. So, if you have changedthe lock code, be sure to write down or memorize it.Emergency NumberYour phone provides the option of storing threeemergency numbers. All these numbers can bemanually dialed at any time even when your phone islocked.IMPORTANT NOTICE!Because of various transmission methods, networkparameters and user settings used to complete a callfrom your wireless phone, a connection cannotalways be guaranteed. Therefore, emergency callingmay not be available on all wireless networks at alltimes.DO NOT depend on this phone as a primary methodof dialing 911 or for any other essential oremergency communications.Remember to always turn your phone on and checkthe adequate signal strength before placing a call.To store a emergency number:1. Press up or down navigation key to find thedesired location and press .2. Enter the desired number and press to savethe number.Each emergency number can be up to 10 digitslong. The number already stored in the selectedlocation is automatically deleted when you enter anew number.To make an emergency call in Lock mode, simplyenter a programmed number, then press .