Samsung SCH R450 - Cricket CRKR450B - Messager User Manual

Also see for Messager: User manual

Contents

Samsung SCH R450 - Cricket CRKR450B - Messager User Manual Manual pdf 100 page image

97Use the navigation keys to highlight the Choice Listbehavior you prefer, then press the key to accept thenew setting.Sensitivity1. From the Voice SVC menu, select Voice Settings ➔Sensitivity. The Sensitivity screen appears in the display.2. Use the Up/Down navigation key to adjust the Sensitivitysetting to Reject More spoken commands or names or toReject Less spoken commands or names.3. To accept the new setting, press the OK soft key.Digit DialingIf you regularly have trouble with VoiceSignal not recognize thenumbers you say, try adapting digit dialing to your voice.Adapting can improve the accuracy of digit recognition,especially for people with strong regional accents.Note: After you adapt Digit Dial, your phone is customized to your voice, andyour voice only. Others will not be able to use it unless they reset thephone to factory defaults.Adaptation involves recording several sequences of four digitseach. The recording process takes about a minute.Tips for Adapting Digit Dialing• Use Adapt Digits in a quiet place.• Make sure you wait for the beep before starting to speak.• Speak clearly, and say each digit distinctly.• If you make a mistake while recording a sequence of digits, or if thereis an unexpected noise that spoils the recording, re-record thatsequence.• Only adapt digits if you are regularly having problems with digit dialing.Once you adapt, digit dialing will not work as well for other peopleusing your phone. (You can always reset digit adaptation to its originalstate, as described below.)Adapt DigitsTo adapt digit dialing, do the following:1. From the Voice SVC menu, press Voice Settings ➔ DigitDialing. The following options appear in the display:• Adapt Digits• Reset Digits2. Select Adapt Digits. Your phone displays the first digitsequence and “Please say” plays through the speakerfollowed by the four digits appearing in the display.OK