Health and Safety Information 115A sum of 5 is considered acceptable for normal use. A sum of 6is considered for best use.If a hearing aid meets the M2 level rating and the wireless mobiledevice meets the M3 level rating, the sum of the two valuesequal M5. This is synonymous for T ratings. This should providethe hearing aid user with “normal usage” while using theirhearing aid with the particular wireless mobile device.“Normal usage” in this context is defined as a signal quality thatis acceptable for normal operation. The M mark is intended to besynonymous with the U mark. The T mark is intended to besynonymous with the UT mark. The M and T marks arerecommended by the Alliance for Telecommunications IndustriesSolutions (ATIS). The U and UT marks are referenced in Section20.19 of the FCC Rules.The HAC rating and measurement procedure are described in theAmerican National Standards Institute (ANSI) C63.19 standard.HAC/Wi-Fi for Newer TechnologiesThis phone has been tested and rated for use with hearing aidsfor some of the wireless technologies that it uses. However, theremay be some newer wireless technologies used in this phonethat have not been tested yet for use with hearing aids. It isimportant to try the different features of this phone thoroughlyand in different locations, using your hearing aid or cochlearimplant, to determine if you hear any interfering noise. Consultyour service provider or the manufacturer of this phone forinformation on hearing aid compatibility. If you have questionsabout return or exchange policies, consult your service provideror phone retailer.Restricting Children's Access to YourMobile DeviceYour mobile device is not a toy. Do not allow children to play withit because they could hurt themselves and others, damage themobile device, or make calls that increase your mobile devicebill.Keep the mobile device and all its parts and accessories out ofthe reach of small children.M3 + M2 = 5 T3 + T2 = 5
