371. In Standby mode, press the Menu soft key and selectContacts. The Contacts screen appears in the display withan alphabetical list of Contacts showing.2. Select the Search field and enter the first few characters ofthe name of the contact as it appears in your Contacts list.Example: If you saved a contact name as “Amy Smith”, begin your search forthat contact by pressing for “A”.Note: As you enter letters, the entry names of the closest matches (thus far)appear in the display.3. When the desired Contacts entry is listed in the display,select it. Then, do one of the following• To dial the number associated with the named Contact, tap theentry, then select ➔ Voice Calls.• To change the information about the contact, press the Edit softkey.GroupThis option lets you find a Contacts list entry with a specificGroup name.1. In Standby mode, press the Menu soft key and selectContacts. The Contacts screen appears in the display withan alphabetical list of Contacts showing.2. Press the Down arrow button at the top right corner of thescreen. The Groups screen appears in the display.3. Select the group you wish to browse. The selected Grouplist appears in the display.4. Highlight the desired Contacts entry, then do one of thefollowing:• To delete the selected contact from the Group, press the Removemember soft key. (Does not apply to the General group.)• To add an existing contact entry to the selected Group, press theAdd member soft key.• To change the name of the Group, press the Rename soft key.• To delete the Group, press the Erase soft key.5. Select the desired option to enter that option’s sub-menu.Editing an Existing Contact EntryOnce stored in the Contacts, an entry can be changed quiteeasily.1. Find the desired entry in the Contacts list. (For moreinformation, refer to “Finding a Contacts Entry” onpage 36.)2. Press the Edit soft key. The Edit Contact screen appears inthe display with the contact name highlighted.3. Highlight a number stored in this contact entry.4. To backspace and delete numbers, press .