portAP MAC View the MAC address of theWLAN AP.To delete all details of the connection profile, select Forget.› Connect to a WLAN using a Wi-Fi Protected Setup(WPS)1 In Menu mode, select Settings →Connectivity →Wi-Fi. 2Select WPS PBC or WPS PIN depending on the AP device type. 3Press a WPS button on the AP device within 2 minutes. Or, entera PIN on the AP device and select Start within 2 minutes.Mobile APLearn about the Mobile AP feature, which sets your device as an wireless AP(Access Point) to connect to the internet on other network devices.1 In Menu mode, select Settings → Connectivity → Mobile AP.2 Select Mobile AP on the top to activate the Mobile AP feature.3 Select OK to confirm.IC noticeThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 duCanadaThis device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not causeinterference, and (2) this device must accept any interference, including interferencethat may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deux conditionssuivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur del'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage estsusceptible d'en compromettre le fonctionnement.