40Section 3To access the VoiceSignal Settings menu, follow thesesteps:1. At the standby screen, press MENU. Use the rightnavigation key to highlight SETTINGS & TOOLS.2. Press Tools, then Voice Commands, andVoice Settings.3. Use the navigation keys to select the setting you want tochange. The following options are available:• Choice Lists: If VoiceSignal is not absolutely confident that ithas correctly identified a name or number, it can display achoice list of up to three possibilities, and prompt you toconfirm the correct one. You can control when choice listsappear by changing the Choice Lists setting to the following:• Automatic: VoiceSignal displays a choice list when it is notconfident it has identified the correct choice from amongmultiple alternatives.• Always On: When there are multiple alternatives,VoiceSignal always displays a choice list.• Always Off: VoiceSignal never displays a choice list. Instead,the application picks the best from among the possiblechoices.• Sensitivity: In VoiceSignal, sensitivity controls the balancebetween rejecting too much, which means the phonefrequently does not recognize names, numbers, orcommands, and rejecting too little, which means itfrequently recognizes something even if nothing was said.When VoiceSignal rejects an utterance, it displays amessage such as “Please repeat…” or “No match found.” Ifyou frequently experience these messages, you might beable to get better recognition by adjusting the Sensitivitysetting toward Reject Less. If you frequently experience