Section 10: Sounds 95Press the Play (left) soft key ( ) to play each ringtone or sound.5. Press the key to save the desired ringtone or sound as the selectedRinger Type.AlertsYou can set your phone to sound an alert whenever you enter or leave your servicearea, connect or disconnect a call, and other options.1. In standby mode, press the MENU key ( ), then press (forSounds) and for Alerts. The following options appear in thedisplay: Minute Beep — Sound an alert ten seconds before each elapsed minute of acall. Roaming — Sound an alert when you leave your home service area while on acall. Call Connect — Sound an alert when you connect a call. Power On/Off — Sound an alert when you turn your phone one or off.2. Use the navigation keys to highlight a sub menu, then press the key.The following available settings appear in the display: On Off3. Use the Up and Down navigation keys to change the setting for theselected alert.4. Press the key to save the new setting. Press to retain thecurrent setting.Key ToneKey Tone allows you to adjust the volume level and length of the tone that thekeypad generates each time you press a key.1. In standby mode, press the MENU key ( ), then press (forSounds) and for Key Tone. The following options appear in thedisplay: Tone Level Tone LengthTone Level is highlighted.2. Press the key to adjust the Key Tone level (volume). Use the volume keys or navigation keys to set the tone level for keypad tones. Press the key when the desired tone level setting is reached to save yoursetting. You are returned to the Key Tone sub menu.3. Use the navigation keys to highlight Tone Length, then press the key.CLR