Section 3: Call Functions 43VoiceSignal™Section 3Digit Dial AdaptationTo access the Adapt Digits menu, follow these steps:1. At the standby screen, press MENU. Use the rightnavigation key to highlight SETTINGS & TOOLS.2. Press Tools, then Voice Commands.3. Press Voice Settings, then Digit Dialing.4. Adapt Digits is highlighted. Press .5. A short description of the Adapt Digits displays.6. Read the description until you are comfortable toproceed, then press .7. Your phone displays the first digit sequence and “Pleasesay” plays through the speaker followed by the fourdigits appearing in the display.Wait for the beep and repeat the digits using your normaltone of voice.8. After a moment, the phone plays back the recording andprompts “Did the recording sound ok?” If the recordingwas good, say “Yes.” If you need to re-record, say “No.”If you say “No,” the phone prompts you to pronounce thedigits again. Wait for the beep and then re-record.Repeat this step until you’re satisfied with the recording.9. After confirming that the recording sounds ok, repeatthe recording process with the next set of digits. Afterten sets of digits, the phone indicates that adaptation iscomplete.
