104Section 71. In standby mode, press MENU, then press the leftnavigation key to highlight MESSAGING, then pressthe left soft key Settings. Or press the left soft keyMessage and press the left soft key Settings.2. Select the message type you would like to change andpress . Choose from the following options:• All Msg: Allows you make a broadcast change to allmessage settings.• Auto Save: Saves all messages sent. Use the navigationkeys to select On, Off, or Prompt.• Auto Erase: Erases the oldest message of the same type(TXT or PIX/FLIX) when the maximum number of receivedmessages of that type is exceeded in the Inbox. For example,the oldest read TXT message is replaced by an incoming TXTmessage when 50 TXT messages are stored in the Inbox, and theoldest read PIX/FLIX message is replaced by an incoming PIX/FLIXmessage when 10 PIX/FLIX messages are stored in the Inbox.Choose from On or Off.• Quick Text: Displays the Quick Text pre-defined entries forText Msg and PIX/FLIX Msg. Press the right soft key Newto add to the Quick Text list. Enter your new text and press. The new Quick Text item shows in the first position of thelist.• Voicemail #: Enter the speed dial entry set for yourvoicemail.• Entry Mode: Sets the default entry mode for messaging.Choose from Word, Abc, ABC, or 123.• Callback #: Displays the callback number in the textmessage. Choose from On or Off.• Signature: Adds the signature text to each message sent.Choose from None or Custom.• TXT Msg: Allows you to customize Text Message settings.
