Call Functions 29Answering a CallPause Dialing From a Contacts Entry• If you voice dial a contact that contains 2-Sec Pause(s) simply wait for the pausesto pass and the dialing to complete.• If you voice dial a contact that contains Wait(s), wait for the appropriate prompt(s)from the number you are calling (credit card number, bank account number, andso on) and enter the appropriate response(s).Answering a CallIncomingWhen you receive a call, the phone displays one of the following:• If the caller can be identified, the caller’s number (or name if it’s in your Contacts)appears in the display.• If the caller cannot be identified, Call from unavailable #, Call from restricted #,or no number appears in the display.Tip: Assign pictures to Contacts entries. The entry’s assigned picture appears in the display when youreceive a call from that entry. See “Assigning a Picture to a Contacts Entry” on page 57.The phone continues to notify you of the call until one of the following events occur:• You answer the call.• The calling party ends the call.• The call is sent to voicemail.Call Notification FeaturesYour phone notifies you of a call in a variety of ways.• Eight ring volume settings: Ringer Off, Vibrate, Low, Low/Medium, Medium,Medium/High, High, or Vibrate/High.• Different ring types or melodies to distinguish callers.• Name display with caller ID. (If the caller’s name is programmed into yourContacts).• Information about the last 90 each of incoming, missed, and outgoing calls areautomatically stored to a call log.Set Call Ringer Volume1. In standby mode, press the Volume key on the left side of the phone.2. Press the Volume key up or down to set the call ringer volume as desired.