Changing Your Settings 72• Emergency Tone: Allows you to set the alert for emergency dialing.The options for the emergency tone are:– Alert: Phone plays the Emergency Dialing tone except when the mastervolume setting is Vibrate or All Sounds Off.Note: If Emergency Tone is set to Alert and Master Volume is set to Vibrate,the handset will vibrate after emergency dialing.If Emergency Tone is set to Alert and the master Volume is set to AllSounds Off, the handset will not sound after emergency dialing.– Vibrate: Phone will vibrate only and will not play the Emergency Dialingtone.Note: If Emergency Tone is set to Vibrate and Master Volume is set to AllSounds Off, the handset will not sound after emergency dialing.– Off: Phone will not play the Emergency Dialing tone or vibrate.• Device Connect: allow you to set a notification when you connectto a device.Keypad SoundsSelect the sound of the keypad when pressed.1. From the home screen, press MENU.2. Press for Settings & Tools menu.3. Press Sounds Settings.4. Press Keypad Sounds.5. Select Default or Xylophone.6. Press to set the new dial sound.Keypad Volume1. From the home screen, press MENU.2. Press for Settings & Tools menu.3. Press Sounds Settings.4. Press Keypad Volume.5. Press the Directional key up or down or Volume keyto adjust the keypad volume.6. Press SET to save.Service Alerts1. From the home screen, press MENU.2. Press for Settings & Tools menu.3. Press Sounds Settings.4. Press Service Alerts. For the following options, youcan turn the Service Alert On or Off.• ERI: Sounds an alert when you go into and out of your coverageareas.wxyzwxyz944 ghighi3 defdefwxyzwxyz944 ghighi4 ghighiwxyzwxyz944 ghighi5 jkljklu430.book Page 72 Wednesday, July 23, 2008 11:07 PM