27 Contacts3. A list of your Contacts is displayed. You can find a specific contact inone of the following ways:• Scroll through the list using the Up and Down navigation keys.• Enter the first few letters to locate the desired Contact. If more thanone Contact appears, scroll through the list using the Up and Downnavigation keys.4. To call the Contact, press .To edit the Contact, press the right soft key for Options, and selectEdit. See "Adding New Entries" on page 26.Selecting Ringer Types to Identify EntriesYou can assign ringer types to different Contact entries so you can identify callersby the ringer you hear when they call.To assign a ringer to a contact:1. Display the edit screen for the Contact. See "Finding, Editing or DialingContacts" on page 26.2. Press the navigation key down until Ring is selected and press .3. Using the navigation keys, select a ringer category and press .4. Press the navigation key up or down to highlight and listen to thedesired ringer. Press to select the desired ringer.5. Press the left soft key for Done to save the changes to the contactentry.Selecting Pictures for EntriesYou can assign a picture to a Contacts entry so that it appears on the displayswhenever that person phones you.To assign a picture to a contact:1. Display the edit screen for the Contact. See "Finding, Editing or DialingContacts" on page 26.2. Press the Up navigation key to select the photo area (if there is nophoto, this area will be labelled Add Photo) and press the right soft keyfor Add. (If a photo has already been assigned, the right soft keywill say Change.)3. Using the navigation keys, select one of the following options:• No Image: Leave the picture blank.