123Ending Calls Before Restarting the VoiceSignal SoftwareWhen you use VoiceSignal to make a call, you must end that call before you can useVoiceSignal again.Voice SettingsChoice ListsVoiceSignal uses choice lists when it is not confident it has correctly recognized aname or number. In this case, it can display a list of up to three possible choices, andprompt you to confirm the correct one.You can change the way that VoiceSignal uses choice lists with name dialing, digitdialing, and contacts. For each feature, you can choose to always see a choice list(even if there is only one choice), or never see a choice list (even if there are multiplechoices). If you leave the setting at “Automatic,” VoiceSignal displays a choice listonly when it is not confident it has correctly recognized the name or number.To change the way VoiceSignal uses choice lists:1. From the Voice Service menu, press (for Voice Settings), andfor Choice Lists the following options appear in the display:• Automatic—VoiceSignal displays a choice list only when it is not sure if it hascorrectly recognized the name or number.• Always On—VoiceSignal always displays a choice list, even when there is onlyone choice.• Always Off—VoiceSignal never displays a choice list.Use the navigation keys to highlight the Choice List behavior you prefer,then press the key to accept the new setting.Sensitivity1. From the Voice Service menu, press (for Voice Settings), andfor Sensitivity. The Sensitivity screen appears in the display.2. Use the navigation keys to adjust the selected Sensitivity setting to RejectMore spoken commands or names or to Reject Less spoken commandsor names.3. Press the key to accept the new setting.Digit DialingIf you regularly have trouble with VoiceSignal not recognize the numbers you say, tryadapting digit dialing to your voice. Adapting can improve the accuracy of digitrecognition, especially for people with strong regional accents.abcabc abc
