26Two-Touch DialingMemory locations 010 through 099 are special Two-Touch dialing locations.Example: For location number 013, briefly press the key, then press and hold the key until thename and number appear in the display and the number is dialed.Three-Touch DialingMemory locations 100 through 999 are special Three-Touch dialing locations.Example: For location number 113, briefly press the key, briefly press the key again, then pressand hold the key until the name and number appear in the display and the number isdialed.Pause Dialing From a Contacts Entry• If you speed dial a contact that contains (two-second) T pause(s) simply wait forthe pauses to pass and the dialing to complete.• If you speed dial a contact that contains (hard) P pause(s), wait for the appropriateprompt(s) from the number you are calling (credit card number, bank accountnumber, and so on) and enter the appropriate response(s).Making a Call — Voice DialingYour Wafer mobile phone includes state-of-the-art voice recognition software thatlets you dial numbers using your voice.Using Voice DialUse the Voice Dial command to dial any number stored in your Contacts list bysaying the name of the contact (Name Dialing). You can also use Voice Dial to dialany valid telephone number, even numbers not stored in your contact list, byspeaking the individual digits in the number (Digit Dialing).Voice Dialing Tips:• Wait for the beep before speaking.• Speak clearly at a normal volume, as if you were talking to someone on the phone.• When saying a name, say the first name then the last name.Dialing a NameTo dial a name, do the following:1. In standby mode, press and hold the key.“Say a Command” appears in the display and is pronounced through theearpiece.@ ))@ )) @ ))
