Samsung SCI-503 Owner's Instructions Manual

Menu Operation9. Change PIN CodeYou can change your PIN code from factory default value "0000" as follows: Select "ChangePIN Code" in the "Installation" menu.== Then you will be asked for a new PIN Code. Once you enter a new PIN Code, the systemwill ask you to enter it again to confirm.== After you enter a new PIN Code twice, the PIN Code has been changed. If you forgotthe PIN Code, you have to contact the distributor to recover it.10. Factory ResetAll data you are using will be deleted and the default data will be loaded.== If you select “Factory Reset”, it asks your confirmation.== If you press “RED” button, then all data will be replace by factory setting.== If you don’t want to reset, press “Menu” or “Exit” to exit this menu.11. Delete Whole ChannelThe whole channel data of satellite will be deleted.== If you select “Delete whole channel”, it asks your confirmation.== If you press “RED” button, then all channel data of satellite will be deleted.== If you don’t want to delete, press “Menu” or “Exit” to exit this menu.26