Advanced RecordingDIS (Digital Image Stabilizer, SCL906/L907 only)ENGLISH35✤ The DIS function works in CAMERA mode only.✤ DIS (Digital Image Stabilizer) is a handshake compensation function that compensates for any shaking or moving of the hand hold-ing the camcorder (within reasonable limits).✤ It provides more stable pictures when: Recording in the Zoom In mode Recording a small object close-up Recording and walking at the same time Recording through the window of a vehicle1. Set the power switch to CAMERA mode. (See page 18) Open the LCD Screen and adjust it to see comfortably.2. Press the MENU ON/OFF button. The MENU list will appear.3. Turn the UP/DOWN dial to DIS.4. Press ENTER. The DIS setting will change.5. Press the MENU ON/OFF button to end the setting. When the DIS is set, the DIS mark( ) will displayed on the OSD.Notes: 1. It is recommended you deactivate the handshake compensation function when using a tripod.2. The DIS function will not operate in the DSE mode.3. The MENU ON/OFF function will not operate in EASY mode.➔➔LCD ADJUSTDIS........................OFFD.ZOOM ..............OFFWHITE BAL ..........AUTODISPLAY ..............ONLANGUAGE..........ENGLISHWL REMOCON ....ONNEXT: MENULCD ADJUSTDIS........................OFFD.ZOOM ..............OFFWHITE BAL ..........AUTODISPLAY ..............ONLANGUAGE..........ENGLISHWL REMOCON ....ONNEXT: MENULCD ADJUSTDIS........................OND.ZOOM ..............OFFWHITE BAL ..........AUTODISPLAY ..............ONLANGUAGE..........ENGLISHWL REMOCON ....ONNEXT: MENU00732M SCL901 SEA (20-45) 12/26/03 10:45 AM Page 35