Samsung SCX-6345N User Manual

Also see for MFP SCX-6345N: Service manual Specifications Solution guide User guide Manual Del Usuario

Contents

6.4 <Scanning>6 Select your machine from the list and enter a name, user ID, andPIN (Personal Identification Number) for the machine.7 Click Next.8 Click Finish.Your machine is added to the Network Scan program and you cannow scan images through the network.NoteYou can change the scanner properties of your machine and thescan settings from the Samsung Network Scan Managerwindow. Click Properties and set the options in each tab.Registering authorized usersTo use scanning to Email, FTP, or SMB, you need to register authorizedusers using SyncThru™ Web Service. You can add up to 50 users.1 Enter your machine’s IP address as the URL in a browser and clickGo to access the web site of your machine.2 Click Machine Settings and User Authentication.3 Click Add.4 Select the index number where the corresponding entry will bestored, from 1 to 50.5 Enter your name, user ID, password, and e-mail address.You need to enter the registered user ID and password in themachine when you start scanning to Email, FTP, SMB from thecontrol panel.6 Click Apply.Setting up an e-mail accountTo scan and send an image as an email attachment, you need to set upnetwork parameters using SyncThru™ Web Service.1 Enter your machine’s IP address as the URL in a browser and clickGo to access the web site of your machine.2 Click Machine Settings and E-mail Setup.3 Select IP Address or Host Name.4 Enter the IP address in dotted decimal notation or a host name.5 Enter the server port number, from 1 to 65535.The default port number is 25.Notes• For the scanner name, the model name of your machine isautomatically entered, but can be changed.• You can enter an ID of up to 8 characters. The first charactermust be a letter.• The PIN must be 4 digits.6 Put a check mark in SMTP Requires Authentication to requireauthentication.7 Enter the SMTP server login name and password.Setting up an FTP serverTo use an FTP server, you need to set up parameters for access to FTPservers using SyncThru™ Web Service.1 Enter your machine’s IP address as the URL in a browser and clickGo to access the web site of your machine.2 Click Machine Settings and FTP Setup.3 Click Server List.4 Click Add.5 Select the index number, from 1 to 20.6 Enter a name in Alias for the Setup for the corresponding ServerList entry. This name will be displayed on your machine.7 Select IP Address or Host Name.8 Enter the server address in dotted decimal notation or a host name.9 Enter the server port number, from 1 to 65535.The default port number is 21.10 Put a check mark in Anonymous if you want to allow the FTPserver to be accessed by unauthorized persons.By default, this is unchecked.11 Enter the login name and password.12 Enter the location the scanned image will be stored. This is thelocation you have entered in the step 6.13 Click Apply.Setting up an SMB serverTo use an SMB server, you need to set up parameters for access to SMBservers using SyncThru™ Web Service.1 Enter your machine’s IP address as the URL in a browser and clickGo to access the web site of your machine.2 Click Machine Settings and SMB Setup.3 Click Server List.4 Click Add.5 Select the index number, from 1 to 20.6 Enter a name in Alias for the Setup for the corresponding ServerList entry. This name will be displayed on your machine.7 Select IP Address or Host Name.