Samsung SCX-812x Series User Manual

Also see for CLX-92x1 Series: User guide

Contents

Introduction_ 36Control panel overviewWhen you use the display screen, use your finger only. The screen may be damaged with a sharpen pen or anything else.1 Display screen Shows the current machine status and prompts during an operation. You can set menus easily using the display screen.2 Status LED Shows the status of your machine (See "Understanding the status LED" on page 37).3 Job Status Shows the jobs currently running, queued jobs, completed jobs, current error code or secured jobs.4 Counter Shows the amount of paper used (See "Counter button" on page 40).5 Eco Turn into Eco mode (See "Eco button" on page 41).6 Clear Deletes characters in the edit area.7 Numeric keypad Dials numbers and enters alphanumeric characters. You can also enter the number value for document copies or otheroptions.8 Reset Resets the current machine’s setup.9 Redial/Pause Redials the recently sent fax number or received caller ID in ready mode, or inserts a pause(-) into a fax number in editmode.10 Log in/Logout Allows user to log in or log out.11 On Hook Dial When you press this button, you can hear a dial tone. Then enter a fax number. It is similar to making a call using speakerphone.12 Power Turn the power on or off. When the blue LED is on, the machine is powered on and you can use it. If you turn the machineoff, press this button for more than three seconds. Press Yes when the confirmation window appears.13 Interrupt Stops a job in operation for urgent copying.14 Stop Stops an operation at any time. The pop-up window appears on the screen showing the current job that the user can stop orresume.15 Start Starts a job.CID123 4 56131415101189127