Samsung SF-530 Series User Manual

Also see for SF-530 Series: Product guide User guide User guide Service manual

Contents

1.22 Getting StartedUsing Save ModesThere is four saving mode buttons on the front panel of the SF-530series. Using these buttons, you can save toner and power consumption,paper for printing, and toll for the fax call.Toner Save ModeToner Save mode allows the machine to use less toner on each page.Press Toner on the front panel to turn this mode on or off.• If the LED is on, Toner Save mode activates and the machine uses lesstoner by 50% to print a page. Using this mode will extend the life ofyour toner cartridge and reduce your cost per page, but will reduceprint quality.• If the LED is off, Toner Save mode deactivates and the machine printsin the normal mode.Power Save ModePower Save mode allows you to save the power consumption.Press Power on the front panel to turn this mode on or off.• If the LED is on, Power Save mode activates and the machine will go toa reduced power state. But it takes long to receive incoming faxes forwarming up the machine.• If the LED is off, Power Save mode deactivates and the machine keepsready to operate with the minimum warm-up time. This uses moreenergy to keep your machine warm and ready to print.To specify how long the machine waits before going to the Power Savemode, press and hold down Power, and select the desired time lengthamong 5MIN, 10MIN and 15MIN using ➛ or ❿. Selecting OFF turnsthe Power Save mode off.Note: Although you turned Power Save mode off by pressing Power, itactivates if you have set the time length.Toner Power Paper TollSAVE