19• Empty: (locations 9-#) allows you to program an additional set offrequently used features.– Select an empty slot and press the key.– Use the Menu and Navigation keys to select a feature, then press theOptions ➔ Assign soft key or the key.In some functions, you may be asked for a password or PIN.Enter the code and press the Select soft key or the key.When you access a list of options, your phone highlights thecurrently active option. If, however, there are only two options,such as On/Off or Enable/Disable, your phone highlights theoption that is not currently active, so that you can select itdirectly.Selecting OptionsTo view the various functions and options available and to selectthe one you want:• Press the appropriate soft key.• To select the function displayed or the option highlighted, press theSelect soft key or the key.• To view the next function or highlight the next option on a list, press theDown Navigation key.• To move back to the previous function or option on a list, press the UpNavigation key.• To move back up one level in the menu structure, press the Back softkey.• To exit the menu structure without changing the settings, press thekey.Command KeysFunctions for the soft keys are defined by what appears aboveeach in the display. There are two soft keys: Left andRight .Soft KeysThe roles of the soft keys vary depending on the function you arecurrently using; the labels on the bottom line of the display justabove each key indicate their current role.Left Soft KeySome functions of the left soft key are as follows.• In the Idle screen, press the Options (left) soft key to open theMy Menu screen.• When in a menu mode, the left soft key function is Select.Right Soft KeySome functions of the right soft key are as follows.• In the Idle screen, press the Menu (right) soft key to display thenine menu icons. See ‘Selecting Functions and Options” on page 18.• When in a menu mode, the right soft key function is Back.a777.book Page 19 Friday, September 26, 2008 4:08 PM