143accessible Wireless Access Point (WAP). These WAPs caneither be Open (unsecured) as within most Hot Spots, orSecured (requiring knowledge of the Router name andpassword).Turning Wi-Fi OnBy default, your device’s Wi-Fi feature is turned off. TurningWi-Fi on makes your device able to discover and connect tocompatible in-range WAPs.1. From the Home screen, tap ➔ Settings.2. Tap the ON/OFF slider, located to the right of the Wi-Fifield, to turn Wi-Fi ON .Connect to a Wi-Fi Network1. From the Home screen, tap ➔ Settings ➔ Wi-Fi.The network names and security settings (Opennetwork or Secured with WEP) of detected Wi-Finetworks are displayed in the Wi-Fi networks section.2. Tap the network you want to connect to.Note: When you select an open network, you will beautomatically connected to the network.3. Enter a wireless password if necessary.Manually add your new network connection1. Tap Add Wi-Fi network.2. Enter the Network SSID. This is the name of yourWireless Access Point.3. Tap the Security field and select a security option. Thismust match the current security setting on your targetWAP.4. If secured, you will also need to enter your WAP’spassword.5. Tap Save to store the new information and connect toyour target WAP.Note: The next time your device connects to a previouslyaccessed or secured wireless network, you are notprompted to enter the WAP key again, unless you resetyour device back to its factory default settings.Turning Wi-Fi Off1. From the Home screen, tap ➔ Settings.2. Tap the ON/OFF slider, located to the right of the Wi-Fifield, to turn Wi-Fi OFF .ONOFF
