Connections 174Manually Scan for a Wi-Fi Network1. From the Home screen, tap ➔ Settings ➔Connections ➔ Wi-Fi.2. Tap Scan.All available Wi-Fi networks are displayed.Wi-Fi Status IndicatorsThe following icons show your Wi-Fi connection status at aglance:Displays when Wi-Fi is connected, active, andcommunicating with a Wireless Access Point(WAP).Displays when there is a Wi-Fi access pointavailable but you are not connected to it. May alsodisplay if there is a communication issue with thetarget Wireless Access Point (WAP).Displays when connected to another device usingWi-Fi Direct. For more information, refer to “Wi-FiDirect” on page 175.Wi-Fi Advanced SettingsThe Advanced Wi-Fi menu allows you to set up many of yourdevice’s advanced Wi-Fi services.1. From the Home screen, tap ➔ Settings ➔Connections ➔ Wi-Fi.2. Press ➔ Advanced.The following options are available:• Network notification: alerts you when a new WAP is available.• Passpoint: allows you to connect to passpoint-enabled Wi-FiAccess Points automatically. Touch and slide the slider to theright to turn it on .• Keep Wi-Fi on during sleep: allows you to specify when todisconnect from Wi-Fi.• Check for Internet service: Checks if Wi-Fi internet service isavailable when connected to an AP (Access Point).• Auto connect: allows you to be automatically connected to anAT&T Wi-Fi Hotspot as soon as your phone detects it.• MAC address: view your device’s MAC address, requiredwhen connecting to some secured networks (not configurable).• IP address: view your device’s IP address.
