Call Functions 51• Speaker: routes the phone’s audio through either the speaker orthrough the earpiece.– Tap Speaker to route the audio through the speaker. (You canadjust the speaker volume using the volume keys.) A green linewill appear under the Speaker button.– Tap Speaker again to use the phone’s earpiece (see“Usingthe Speakerphone During an Active Call” on page 53). Thegreen line will disappear when Speaker is not activated.• Mute/Unmute turn the onboard microphone either on or off.– Tap Mute during a call to mute the microphone. A green linewill appear under the Mute button.– Tap Mute again to unmute the microphone. The green line willdisappear when Mute is not activated.• Headset connects to a Bluetooth headset.– Tap Headset during a call to activate a Bluetooth headset. Agreen line will appear under the Headset button.– Tap Headset again to de-activate the Bluetooth headset. Thegreen line will disappear when the Headset is not activated.• Press for more options:– Contacts: allows you to go to your Contact list.– Message: allows you to go to write a message during a call.– Memo: allows you to jot down a memo during a call.– Noise reduction on/off: allows you to turn on the NoiseReduction feature when you are in a noisy area. Turn it off whennot needed to conserve battery power.Placing a Call on HoldYou can place the current call on hold at any point during aconversation. You can also make another call while you havea call in progress if your network supports this service.1. While on a call, tap Hold . This action placesthe current caller on hold.2. You can later reactivate this call by tapping Unhold.To make a new call while you have a call in progress1. Tap Hold .2. Tap Add call to display the dialer.3. Enter the new number and tap .Once connected, the active call will appear in a largebox at the top of your screen and the call on hold willappear in a smaller box in the middle of your screen.HoldUnholdHold
