6 7Set up Your i907Set up Your i907What’s in the Box?To get started, we recommend the following:Carefully follow the step-by-step instructions in this guide to•set up your device.Review the User Manual on the Getting Started CD to learn•about the full power of the i907.Take note of the following components included in the box:Insert the SIMRemove the battery cover.1.Remove battery.2.Slide SIM face up (gold contacts3.face down) into SIM slot.Replace battery and battery cover.4.Insert BatteryRemove the battery cover.1.Align the contacts on the battery with the contacts in the back of the device.2.Push the battery down until it locks into place.3.Replace the battery cover.4.Charge BatteryPlug the AC Travel Charger into a standard AC wall outlet.1.Plug the travel charger into the jack on the top right side of the phone with the green2.arrow facing up. The indicator light at the top of the device is red while charging, andgreen when fully charged.Note: When charging is complete, unplug the charger from the power outlet.Insert microSD™ CardA microSD™ Card is a removable memory card that will increase datastorage capacity of the device.Remove the cover on the right side of the device, that reads microSD™.1.Insert the narrow end of the microSD™ Card into the slot, then replace2.the cover.Note: microSD™ Card sold separately.AT&T & OEM Branded CD Travel ChargerStandard BatteryData CableI907+I9073.5 mm Audio AdaptorGetting Started CD