Samsung SGH-M100 User Manual

Also see for SGH-M100: Owner's manual Service manual

Samsung SGH-M100 User Manual Manual pdf 49 page image

Change Barring Password: you can set andchange the call barring password obtained from yourservice provider using this option. You must enter thecurrent password before you can specify a new one.Once you have entered a new password, you areasked to confirm it by entering it again.Call Waiting Menu 7.3This network service enables you to be informed whensomeone is trying to reach you during another call.You can specify individual call waiting options foreach of the following call types:1 Voice calls2 Fax calls3 Data calls4 Cancel allTo set your call waiting options, proceed as follows.1. Select the type of calls to which the call waitingoption is to be applied by pressing the orkey until the appropriate option ishighlighted. Then press Select.2. Press the or key until the appropriateoption is highlighted. The following options areavailable.• Activate: activates the Call Waiting feature.• Cancel: deactivates the Call Waiting feature.• Status: shows the current Call Waiting status.3. Press Select.9594NNeettwwoorrkk SSeerrvviicceessYou can also deactivate all call waiting settings byselecting the Cancel All option.Note: Fax calls and Data calls may not appeardepending on your SIM card.Network Selection Menu 7.4The Network Selection feature enables you toindicate whether the network used when roaming(outside your home area) is selected automaticallyor manually.Note: You can select a network other than yourhome network only if it has a valid roamingagreement with your home network.To indicate whether the network is to be selectedautomatically or manually when roaming, proceed asfollows.1. When Network Selection is displayed, pressthe Select soft key.2. Press the or key until the appropriateoption is highlighted and then press the OK soft key.If you select Automatic, you are connected to thefirst available network when roaming.If you select Manual, the phone scans for theavailable networks. Go to Step 3.3. Press the or key until the preferrednetwork is highlighted and then press the OKsoft key.You are connected to that network.NNeettwwoorrkk SSeerrvviicceess