48IInn--CCaallll OOppttiioonnss49In-Call OptionsYour phone provides a number of control functions thatyou can use during a call.Putting a Call on HoldYou can place the current call on hold whenever youwant. You can make another call while you have a call inprogress if this service is supported by the network. Ofthese two calls, one is active and the other is on holdand you can swap between the calls.To place a call on hold, simply press the Hold soft key.You can reactivate the call whenever you want, bypressing the Unhold soft key.To make a call while you have a call in progress, proceedas follows.1. Key in the phone number that you wish to dial or lookit up in the phonebook.2. Press the key to dial the second call.The first call is automatically put on hold.Or alternatively, proceed as follows.1. Put the current call on hold by pressing the Hold softkey.2. Make the second call in the normal way.To swap between the two calls, simply press the Swapsoft key.The current call is placed on hold and the call on hold isreactivated so that you can continue conversing with theother party.When you have finished, end each call normally bypressing the key.Switching the Microphone Off (Mute)You can temporarily switch your phone’s microphone off,so that the other party cannot hear you.Example: You wish to say something to another personin the room but do not want the other party tohear you.To switch the microphone off temporarily, proceed asfollows.1. Press the Options soft key.2. If necessary, press the key to highlight the Muteoption.3. Press the OK soft key.Your correspondent can no longer hear you.