50Options During a CallYour phone provides a number of control functionsthat you can use during a call.Putting a Call on HoldYou can place the current call on hold whenever youwant. You can make another call while you have acall in progress if your network supports thisservice. If you have an active call and a call on hold,you may switch between the two calls, changing theone on hold to active and placing the other on hold.To place a call on hold, simply press the Hold softkey. You can reactivate the call whenever you want,by pressing the Unhold soft key.To make a call while you have a call in progress:1. Enter the phone number that you wish to dial orlook it up in the phonebook.2. Press the key to dial the second call.The first call is automatically put on hold.Or alternatively, proceed as follows.1. Put the current call on hold by pressing theHold soft key.2. Make the second call in the normal way.To switch between the two calls, simply press theSwap soft key.The current call is placed on hold and the call onhold is reactivated so that you can continueconversing with the other party.When you have finished, end each call normally bypressing the key.Options During a Call51Switching the Microphone Off (Mute)You can temporarily switch your phone’smicrophone off so that the other party cannot hearyou.Example: You wish to say something to anotherperson in the room but do not want theother party to hear you.To switch the microphone off temporarily:1. Press the Options soft key.2. If necessary, press the key to highlight theMute option.3. Press the OK soft key.The other party can no longer hear you.To switch the microphone back on:1. Press the Options soft key.2. If necessary, press the key to highlight theUnmute option.3. Press the OK soft key.The other party can hear you again.