Getting Started202. Plug the adapter into a standard AC wall outlet.3. When charging is finished, unplug the adapterfrom the power outlet and from the phone bypressing the grey tabs on both sides of theconnector and pulling the connector out.Note: You must unplug the adapter before removingthe battery from the phone during charging;otherwise, the phone could be damaged.Low Battery IndicatorWhen the battery is weak and only a few minutes oftalk time remain, a warning tone sounds and amessage repeats at regular intervals on the display.When the battery level gets too low, the phoneturns off automatically.Getting Started21Switching the Phone On or Off1. Open the folder.2. Hold down the key until the phoneswitches on.3. If the phone asks you to enter the phonepassword, enter the password and press the OKsoft key. The phone password is preset to“00000000” at the factory. For further details,see page 131.4. If the phone asks for a PIN, enter the PIN andpress the OK soft key. For further details, seepage 132.The phone searches for your network and afterfinding it, the idle screen, illustrated below,appears on both displays. Now, you can make orreceive a call.Note: The display language is preset to English atthe factory. To change the language, usethe Language menu option (Menu 5.5).For further details, see page 92.5. When you wish to switch the phone off, holddown the key until the power-off imagedisplays.Service Provider07:30Wed 06 Mar07:30Wed/06Menu Name