143Changing the WAP ProfilesYour phone is wirelessly connecting to the Internet via a built in WAP browser.Connection can be made via either one of four available WAP browsers: MEdia Net,AT&T MMS (MultiMedia Server), or AT&T IMS. Use this menu to create andcustomize the profiles containing the settings for connecting your phone to thenetwork. You need these settings to use the web browser or send MMS messages ore-mails. Although the active connection can be changed by the user, it isrecommended that this choice be made with the assistance of either the retailer orcustomer service representative.1. When the Idle screen displays, press the Menu soft key.2. Highlight MEdia Net and press the Select soft key or the key.3. Highlight Browser Settings and press the Select soft key or the key.4. Use the Up or Down Navigation key to highlight one of these options:• MEdia Net• AT&T MMS• AT&T IMS5. Press the Options soft key.Notes: The WAPs are pre-configured and can not be altered on this screen. The MMS connection option canbe edited, renamed, or deleted on this screen. Your phone is set up by default for connecting to the network.If you change the settings without first checking with your service provider, the web browser, MMS, and e-mail features may not work properly.6. To create a new connection, press the Options soft key, select New, andpress the Select soft key or the key.- or -7. To edit the existing MMS, highlight this entry, press the Options soft key,select Edit, and press the Select soft key or the key.8. Select the parameter you want to edit:• Set Name: enter a profile name.• Access Name: edit the access point name.• Auth Type: select the type of authentication used for this WAP connection:None, Normal, or Secure.• User ID: enter the User ID required to connect to the network.• Password: enter the user password required to connect to the network.• Protocol: set the connection protocol used by the WAP browser: WAP or HTTP.• Home URL: enter the URL address of the page to be used as your homepage.• Gateway address: (WAP only) enter the gateway address of the proxy server.
