Getting Started 18Switching the Device On or OffOnce the device has been configured, you will not beprompted with setup screens again.1. Press and hold until the device switches on.The device searches for your network and after findingit, you can make or receive calls.Note: The display language is preset to English at the factory.To change the language, use the Language menu. Formore information, refer to “Language and InputSettings” on page 261.2. Press and hold (Power/End) until the Deviceoptions screen appears.3. Tap Power off ( ).Restarting the Device1. Press and hold (Power/End) until the Deviceoptions screen appears.2. Tap Restart ( ).Locking and Unlocking the DeviceBy default, the device screen locks when the backlight turnsoff. Place your finger on the screen and swipe the glass inany of the directions shown unlock the device.
