Camera 120• Mode: takes a photo in various modes. Once you change the mode, the corresponding indicator displays atthe top left of the display.– Single: takes a single photo and allows you to view it before returning to the shooting mode.– Continuous : takes a succession of photos.– Panorama: takes a landscape photo and places a black mat in front of the photo so it looks like there are four panels in one photo.– Smile shot: the camera focuses on the foreground or subject and not on the background.– Mosaic: Takes up to four photos and then groups them together into a single final photo.• Timer: allows you to set a time delay before the camera takes the photo. Select the length of delay you want and touch the Off ,2, 5, and 10 seconds. When you press the Camera key, the camera takes the photo after the specified time elapses.• Setup: allows you to configure the following:– Scene: allows you to set the camera options to capture scenes such as None, Portrait, Landscape, Night, Sports, Party/Indoor,Beach/Snow, Sunset, Dawn, Fall color, Firework,or Backlight.– Resolution: allows you to set the image size to either: 8M (3264x2448), 5M(2560x1920), 3M(2048x1536), 2M (1600x1200), 0.3M(640x480), w6M (3264x1960), or 400x240. Note: w6M (the w stands for wide angle).– White balance: allows you to set this option from the following choices: Auto, Daylight, Incandescent, Fluorescent, or Cloudy.– Effects: allows you to change the color tone or apply special effects to the photo. Options include: None, Black and white, Sepia,Negative, or Water Color.– Auto focus: allows you to focus on the center of the viewfinder. Modes are Auto focus, Macro, or Face detection.– ISO: allows you to adjust the ISO sensitivity of the camera imaging sensor. Selections are: Auto, 100, 200, 400 , 800, or 1600 speed.– Image quality: allows you to set the image quality to: Superfine, Fine, Normal, or Economy.– Exposure meter: allows you to set how the camera measures or meters the light source: Matrix, Centre-weighted or Spot.– Anti-Shake: allows you to touch On to activate Anti-Shake, or Off to deactivate it.– WDR: allows you to set the Wide Dynamic Range. Touch On to activate WDR, or Off to deactivate it.– Blink detection: allows you to activate or deactivate the blink detection feature.– Adjust: allows you to use the slider bar to adjust the Contrast, Saturation, or Sharpness.• Flash: allows you to set the flash mode to: Automatic, Manual, or No flash.• Brightness: allows you to increase or decrease the brightness levels.• Default destination: allows you to Change the current location by establishing a new folder in which to place the pictures, orRemove a current destination location . Automatically set to My Album online by default.• Photos: displays the photos in the photos folder.