Samsung SGH-X160B Service Manual

Also see for SGH-X160B: Quick guide

SAMSUNG Proprietary-Contents may change without notice6. Disassembly and Assembly instructions6-1This Document can not be used without Samsung's authorization6-1. DisassemblyANTCONTACTSIDE KEYEAR JACK1. loosen the four screws at the rear cover2. Open the rear cover from the bottom-side hook※ caution1. Handle the HOOK with care, and check Nobending the board and front cover2. MIC RUBBER is the proper place3. Do not touch antenna contact with fingersIF COVER1. Disconnect LCD CONN from the Main Board2. Take off the main board from the case aftertaking out the IF cover3. Take off the Key pad※ caution1. Handle with care LCD CONN itself and dustFRONT HOLE TAPEafter disassembly1. Take out the FRONT HOLE TAPE2. Take off the Hinge with widening the left sidegap with front cover.3. Carefully take out the LCD FPCB through FRONTHOLE※ caution1. LCD FPCB is easy to breakSCREWCAP/SCREW1. Pull up the SCREW CAP with pinset.2. Loosen the screws from cover(2 POINT)3. Open the FOLDER UPPER※ caution1. Do not Scratch with the JIG to open2. Handle the HOOK with care, and check Nobending the board and front cover1432