SAMSUNG Proprietary-Contents may change without notice6. Disassembly and Assembly instructions6-1This Document can not be used without Samsung's authorization6-1. Disassembly11) Put the antenna in the right position caringabout that the hook is properly lock it.Then screw the antenna.1) Place and stick the KEY FPCB properly withchecking out that four poles in the red circlesare in the middle of holes of the KEY FPCB.1) Remove the cover of the tape on thebottom of the motor, stick the motor on theframe. Press the motor slightly to stick themotor firmly.23 41) Remove the cover on the tape stuck onthe frame insert the LCD connector throughthe hole in the frame. Place and stick thebottom right corner of the LCD to the redguide line in the blue circle.5 61) Remove the cover of the tape on thebottom of the motor, stick the motor on theframe. Press the motor slightly to stick themotor firmly.1) Remove the cover of the tape on thebottom of the motor, stick the motor on theframe. Press the motor slightly to stick themotor firmly.