133To scan for Bluetooth devices:1. Verify your Bluetooth is active.2. From the Bluetooth settings page, tap Search for devices tosearch for visible external Bluetooth-compatible devicessuch as headsets, devices, printers, and computers.Pairing Bluetooth DevicesThe Bluetooth pairing process allows you to establish trustedconnections between your device and another Bluetooth device.When you pair devices, they share a passkey, allowing for fast,secure connections while bypassing the discovery andauthentication process.To pair your device with another Bluetooth device:1. Verify your Bluetooth is active.2. Tap Search for devices. Your device will display a list ofdiscovered in-range Bluetooth devices.3. Tap a device from the list to initiate pairing.4. Enter the passkey or PIN code, if needed, and tap OK.5. The external device will then have to also accept theconnection and enter your device’s PIN code.Once successfully paired to an external device,appears within the Status area.Note: Due to different specifications and features of other Bluetooth-compatible devices, display and operations may be different, andfunctions such as transfer or exchange may not be possible with allBluetooth compatible devices.Note: Pairing between two Bluetooth devices is a one-time process. Once apairing has been created, the devices will continue to recognize theirpartnership and exchange information without having to re-enter apasscode again.Disconnecting a paired deviceDisconnecting a paired device breaks the connection betweenthe device and your phone, but retains the knowledge of thepairing. At a later point when you wish to reconnect the device,there is no need to setup the connection information again.1. Verify your Bluetooth is active.2. From the Bluetooth settings page, tap the previously paireddevice (from the bottom of the page).3. Tap OK to confirm disconnection.– or –
