Health and Safety Information 104UL Certified Travel AdapterBefore a new model phone is available for sale to the public, it must be tested andcertified to the FCC that it does not exceed the exposure limit established by theFCC. Tests for each model phone are performed in positions and locations (e.g. atthe ear and worn on the body) as required by the FCC. For body worn operation, thisphone has been tested and meets FCC RF exposure guidelines when used with anaccessory that contains no metal and that positions the handset a minimum of 1.5cm from the body. Use of other accessories may not ensure compliance with FCC RFexposure guidelines.The FCC has granted an Equipment Authorization for this mobile phone with allreported SAR levels evaluated as in compliance with the FCC RF exposureguidelines. The maximum SAR values for this model phone as reported to the FCCare:• Head: 1.24 W/Kg.• Body-worn: .85 W/Kg.SAR information on this and other model phones can be viewed on-line athttp://www.fcc.gov/oet/ea. To find information that pertains to a particular modelphone, this site uses the phone FCC ID number which is usually printed somewhereon the case of the phone. Sometimes it may be necessary to remove the batterypack to find the number. Once you have the FCC ID number for a particular phone,follow the instructions on the website and it should provide values for typical ormaximum SAR for a particular phone. Additional product specific SAR informationcan also be obtained at www.fcc.gov/cgb/sar.UL Certified Travel AdapterThe Travel Adaptor for this phone has met UL 1310 safety requirements. Pleaseadhere to the following safety instructions per UL guidelines.FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUSPERSONAL INJURY AND POSSIBLE PROPERTY DAMAGEIMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOWTHESE INSTRUCTIONS.FOR CONNECTION TO A SUPPLY NOT IN THE U.S.A., USE AN ATTACHMENT PLUGADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS POWERUNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR HORIZONTALOR FLOOR MOUNT POSITION.