Removing Excess HumidityE-13ENGLISHIf the atmosphere in your room is very humid or damp, you canremove excess humidity without lowering the room temperature toomuch.1 If necessary, press the (On/Off) button.Result: ◆ The operation indicator on the indoor unit lights up.◆ The air conditioner starts up in the mode selected whenthe unit was last used.◆ The indoor unit beeps.The air conditioner is fitted with a protection mechanismto prevent the unit from being damaged when it is startedimmediately after being:◆ Plugged in◆ StoppedIt will start up normally after three minutes.2 If the is not displayed at the top of the remote control, press thebutton on the remote control one or more times until it appears.Result: ◆ The indoor unit beeps each time you press the button.◆ The air conditioner runs in DRY mode.NNNN oooo tttt eeee You can change modes at any time.3 To adjust the temperature, press the button one or more timesuntil the required temperature is displayed.Possible temperatures are between 18°C and 30°C inclusive.Result: ◆ Each time you press the button:- The temperature is adjusted by 1°C- The indoor unit beeps◆ The air conditioner starts removing the excess humidity;the quantity of air is adjusted automatically.4 To control the direction of the air flow, refer to pages 16 and 17.IMPORTANT