Samsung SH18BW6 Series User Manual

Also see for SH18BW6 Series: Service manual Service manual

ENGLISHSelecting the Heat ModeYou can select the Heat mode if you want to heat your room.You can adjust the temperature and the fan speed when heating.E-11To control the airflow direction, refer to pages 16 and 17.5Press the button to adjust the temperature until the requiredtemperature is displayed.You can set the temperature between 16°C and 30°C.Result: Each time you press the button :- The temperature is adjusted by 1°C- The indoor unit beeps If the room temperature reaches 5°C higher than the settemperature, the air conditioner stops heating, but the fanoperates consistently. If the room temperature reaches 3°C lower than the settemperature, the air conditioner starts heating again.3Press the button on the remote control until is displayed.Result: The indoor unit beeps each time you press the button. The air conditioner runs in the Heat mode.2You can change modes at any time.NNNN oooo tttt eeee1 If necessary, press the button.Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps.Press the button to select the fan speed until the required settingis displayed.Automatic (rotated : )LowMediumHighMaximumResult: Each time you press the button, the indoor unit beeps. For the first 3~5 minutes, the fan may not operate toprevent the cool air from running out of the indoor unit.It helps to warm the air in your room sufficiently.4