IPv6 configuration232. Using a Network-Connected Machine• Accessing menus may differ from model to model (see "Accessing themenu" on page 30).• It may be necessary to press OK to navigate to lower-level menus forsome models.1 Select (Menu) > Network > TCP/IP (IPv6) > DHCPv6 Config on thecontrol panel.2 Press OK to select the required value you want.• DHCPv6 Addr.: Always use DHCPv6 regardless of router request.• DHCPv6 Off: Never use DHCPv6 regardless of router request.• Router: Use DHCPv6 only when requested by a router.11From the SyncThru™ Web ServiceActivating IPv61 Access a web browser, such as Internet Explorer, from Windows. Enterthe machine IP address (http://xxx.xxx.xxx.xxx) in the address field andpress the Enter key or click Go.2 If it’s your first time logging into SyncThru™ Web Service you need tolog-in as an administrator. Type in the below default ID and password.We recommend you to change the default password for securityreasons.• ID: admin• Password: sec000003 When the SyncThru™ Web Service window opens, move the mousecursor over the Settings of the top menu bar and then click NetworkSettings.4 Click TCP/IPv6 on the left pane of the website.5 Check the IPv6 Protocol check box to activate IPv6.6 Click the Apply button.7 Turn the machine off and turn it on again.
