20Starting the recording modeHow to use the Auto mode ( ) If the auto focus frame turns to red when you press the shutterbutton down half way, it means that the camera cannot focuson the subject. Should this be the case, the camera is unable tocapture an image clearly. Avoid obstructing the lens or the flash when you capture an image.1. Insert the batteries (p.14). Insert thebatteries taking note of the polarity (+ / -).2. Insert the memory card (p.14).As this camera has a 11MB internalmemory, you do not need to insert thememory card. If the memory card isnot inserted, an image will be storedin the internal memory. If the memory card is inserted, an imagewill be stored on the memory card.3. Close the battery chamber cover.4. Press the power button to turn on the camera.5. Select the Auto mode by pressing the MENU button.6. Point the camera towards the subject and compose the imageby using the LCD monitor.7. Press the shutter button to capture an image.Select this mode for quick and easy picture taking with minimal userinteraction.Selecting modesYou can select the desired working mode us-ing the MENU button located on the back ofthe camera. How to use the MENU button1. Press the MENU button and a menuwill be displayed.2. Press the Up / Down button to selectthe [Mode] menu and press the Rightbutton.3. Select a desired mode by pressingthe Up / Down button and then pressthe OK button.Mode ProgramDISPhoto Help GuideSceneMovieAutoFunctionsSoundDisplaySettingsExit ChangeProgramProgramProgramExit BackExit BackExit BackDISPhoto Help GuideSceneMovieAutoDISPhoto Help GuideSceneMovieAutoDISPhoto Help GuideSceneMode ProgramDISPhoto Help GuideSceneMovieAutoFunctionsSoundDisplaySettingsMovieAutoExit Change