20Selecting the automatic mode will configure the camera withoptimal settings. You can still manually configure all functionsexcept the aperture value and shutter speed.1. Select the Program mode by pressingthe MENU button (p.19).2. Press the Menu button to configureadvanced functions.How to use the Program mode ( )Starting the recording modeDigital Image Stabilisation (DIS) mode.This mode will reduce the effect of camera shake and help you geta well-exposed image in dim conditions.1. Select the DIS mode by pressing theMENU button. (p.19)2. Point the camera towards the subjectand compose the image by using theLCD monitor.3. Press the Shutter button to capture animage.How to use the DIS mode ( ) Things to watch out for using the DIS mode1. The digital zoom will not operate in the DIS mode.2. If the lighting condition is brighter than fluorescent lightingconditions, the DIS will not activate.3. If the lighting condition is darker than in fluorescent lightingconditions, camera shake warning indicator ( Ã ) will display.For best results only take pictures in situations where thecamera shake warning indicator ( Ã ) is not displayed.4. If the subject is moving, the captured image may be blurred.5. As the DIS uses the camera's digital signal processor, it maytake a little longer for the camera to process and save theimages.The submenus for the functions are as follows:Description Page Description PageEV p.34 Metering p.39White Balance p.35 Drive p.40ISO p.36 Focus Area p.40Face Detection p.36 Photo Style Selector p.41Photo Size / Movie Size p.38 Image Adjust p.42Quality / Frame Rate p.39 Voice p.43