037Ê Selecting the self-timer1. Select a Recording mode with theexception of Voice recording mode.(p.21)2. Press the Self-timer / Right ( )button until the desired mode indicatordisplays on the LCD monitor. A 10 second,2 second, Double self-timer or Motion timericon appears on the LCD monitor.3. When you press the shutter button, thepicture will be taken after the specifiedtime has elapsed.Self-timer ( ) / Right button[Selecting the 10 SECself-timer]Ê Self-timer mode indicatorIcon Mode Description10 Secself-timerPressing the shutter button will allow an interval of10 seconds before the image is taken.2 Secself-timerPressing the shutter button will allow an interval of2 seconds before the image is taken.Doubleself-timerA picture will be taken after about 10 seconds and2 seconds later a second picture will be taken.When using the flash, the 2-secondself-timer may be delayed for longer than 2 sec-onds depending on the flash charging time.MotionTimerThe camera detects the subject's movement 6seconds after pressing the Shutter button, and thepicture is taken when the movement is stopped.Ê The Motion Timer flows are as followings. (Movie mode excluded)Selecting the Motion Timer à Pressing the Shutter button ÃConfirming the composition (Within 6 sec.) *1 à Starting the detec-tion (Swing your hands fully) *2 à Stopping the detection(Do not move) à Taking an image (after 2 sec.)*1: The camera detects the subject's movement 6 seconds after pressing theShtter button, so confirm the composition within 6 seconds.*2: Move your body or hands fully.Ê Motion TimerMotion Icon & Self-timer lampPressing the Shuter button aftersetting the Motion Timer Blink (1 second interval)Detecting the subject's movement Blink (0.25 second interval)No movement is detected Turn on and the image is takenafter 2 secondsIn the following cases, the Motion Timer may not operate.å The focus distance is over 3m.å The exposure is too bright or too dark.å In backlight conditions.å The movement is insignificant.å The movement is detectedbeyond the center part (50%) ofthe sensor where the movementis recognized.å If the camera doesn't sense anymovement for 30 seconds, or thecamera doesn’t sense stillnessafter sensing movement.The detection range ofMotion Timer