Media92Controlling the camera remotelySet a device as a viewfinder to control the camera remotely.Tap → → Remote viewfinder, and then connect the device and the camera using Wi-FiDirect or NFC. Tap to take a photo remotely using the device as a viewfinder.Configuring settings for CameraTap to configure settings for Camera. Not all of the following options are available in bothstill camera and video camera modes. The available options vary depending on the modeused.• Photo size / Video size: Select a resolution. Use higher resolution for higher quality. But ittakes up more memory.• Burst shot: Take a series of photos of moving subjects.• Tap to take pics: Tap the image on the preview screen to take photos.• Face detection: Set the device to recognise people’s faces and help you take photos ofthem.• Metering modes: Select a metering method. This determines how light values arecalculated. Centre-weighted measures background light in the centre of the scene. Spotmeasures the light value at a specific location. Matrix averages the entire scene.• ISO: Select an ISO value. This controls camera light sensitivity. It is measured in film-camera equivalents. Low values are for stationary or brightly-lit objects. Higher values arefor fast-moving or poorly-lit objects.• Video stabilisation: Activate or deactivate anti-shake. Anti-shake helps focus when thecamera is moving.• Smart stabilisation: Set the device to automatically detect darker conditions and adjustthe brightness of the photo without the flash.• Save as: Set the device to delete the original photo when taking photos with rich tonemode.
