Useful apps1257 Ensure that the device’s infrared port is facing the TV and tap TV. Then, tap Yes, this code1 works if the device turns on the TV.If the device does not turn on the TV, tap Send this code 1 again or No, test next code 2,and then repeat this until the TV recognises the signal.8 Select a channel source.Using the device as a remote controlYou can turn the TV on or off, browse channels, or adjust the volume level on the TV using thedevice as a remote control.1 Tap Smart Remote on the All apps screen.2 Select a category at the top of the screen.3 Face the device’s infrared port to the TV, select a TV programme, and then tap WATCH ONTV.The selected programme will be shown on the connected TV.4 Tap to change the channel or the volume.The remote control panel appears on the screen.Turn the TV on or off.TV control menusAdditional functionsAccess additional options.
