Using the 360 Round31Setting 2D or 3D modeYou can select which camera to use when you are recording video.1 Launch the 360 Round program on your computer.2 Click the L-R Camera button to select the camera to be used for recording. Refer toChecking the location of each camera for the detailed location of cameras on the right orleft side of the 360 Round.• On Panoramic view, Stretched view, 360˚ view or Round view mode:– : You can record 2D video using the 8 cameras on the right side, and thecamera on the top of the 360 Round.– : You can record 2D video using the 8 cameras on the left side, and thecamera on the top of the 360 Round.– : You can record 3D video with all of the 17 cameras on the 360 Round.– : All cameras are turned off and the preview screen is disabled.• On Source view mode:– : You can record 3D video with all of the 17 cameras on the 360 Round.– : All cameras are turned off and the preview screen is disabled.Rotating the preview screenYou can record and view videos by rotating the preview screen up and down in 180 degrees.Click to rotate the preview screen.Adjusting the volume of recording audioYou can adjust the volume of the audio to be recorded.Click to adjust the volume.If you set the volume excessively high when recording video in a high surroundingenvironment, the audio may be distorted. Launch the 360 Round program and clickthe Audio tab and set Mic. Level - Internal to Auto or Manual to turn down thevolume.