Appendix107Removing the battery (non-removable type)• These instructions are only for your service provider or an authorised repair agent.• Damage or faults caused by the unauthorised removal of the battery are notcovered by the warranty.• To remove or replace the battery, contact your service provider or an authorisedrepair agent.1 Insert the device opening tool into the gap between the device’s screen and the backcover.Then, start separating the screen from the back cover by using the tool to pry them apartas shown in the image below.Take care when inserting the tool to avoid damaging the device’s internalcomponents.2 Continue reinserting the tool and prying the screen and the back cover apart at closeintervals around the device.Rotate the back cover carefully and ensure that the hooks are not damaged.3 When the screen is disengaged, separate the screen and the back cover.Then, put the back cover aside and place the screen face down on a flat work surface.