Device & data manager80Using the device as a removable disk for datatransferMove audio, video, image, or other types of files from the device to the computer, or viceversa.Do not disconnect the USB cable from the device when you are transferring files.Doing so may cause data loss or device damage.The devices may not connect properly if they are connected via a USB hub. Directlyconnect the device to the computer’s USB port.1 Connect the device to the computer using the USB cable.2 Open the notifications panel, and then tap Connected as a media device → Mediadevice (MTP).Tap Camera (PTP) if your computer does not support Media Transfer Protocol (MTP) ornot have any appropriate driver installed.3 Transfer files between your device and the computer.Updating the deviceThe device can be updated to the latest software.Updating over the airThe device can be directly updated to the latest software by the firmware over-the-air (FOTA)service.On the Apps screen, tap Settings → About device → Software update → Update now.To automatically check for available updates, tap the Auto update switch to activateit. To download updates only when a Wi-Fi connection is activated, tap the Wi-Fi onlyswitch to activate it.DRAFT