Apps and features35Charging the S PenThe S Pen must be charged before you can control apps remotely by using the S Pen button.When the S Pen and the S Pen charger are properly aligned, charging will begin.If the Air action feature is deactivated, the S Pen will be charged only when the device ischarging.• If the device and the S Pen are not attached like in the image, the S Pen may not becharged. Attach the S Pen by aligning the top of the S Pen to the end of the S Pencharger as shown in the image.• If you use the device on the floor with the S Pen attached to the S Pen charger, it mayscratch the S Pen.Air actionsControl apps remotely by using the S Pen connected to your device via Bluetooth Low Energy(BLE).For example, you can quickly launch apps, such as the camera app, by pressing and holdingthe S Pen button. Also, while using the camera app, you can take a picture by pressing thebutton once. While playing music, you can turn the volume up if you lift the S Pen up whilepressing and holding the S Pen button and turn the volume down if you lower it.• The S Pen must be charged before you can use the Air actions feature. Refer toCharging the S Pen for more information.• When you detach the S Pen from the S Pen charger, the icon will appear on thestatus bar. If the S Pen is discharged or far from the device, or if there are obstaclesor there is external interference between the S Pen and the device, the S Pen will bedisconnected from the device and the icon will turn grey ( ). To use the Air actionsfeature again, connect the S Pen with the device by reattaching the S Pen to theS Pen charger.