Manual Wired Network SetupIf the network requires a static IP address, enter the IP address, subnet mask, gateway and DNS valuesto connect to the network manually. To get the IP address, subnet mask, gateway and DNS values,contact your Internet Service Provider (ISP). Refer to the "Dynamic versus Static IP Addresses" formore information.11 Set Network Type to Wired and then select Connect.Network SettingsSelect your network type.Network Type WiredConnectPlug a network cable intothe back of your TV.21 Select Stop when the TV attempts to connect to the network. Once the network connection hasbeen interrupted, select IP Settings.Network SettingsConnection verification cancelled.Wired network connection test stopped.Change Network IP Settings Retry Close
