Anynet+ (HDMI-CEC) Isn't WorkingThe problem Try this!Anynet+ does not work.Confirm that the device is an Anynet+ device. The Anynet+ system supports Anynet+devices only.Check if the power cord of the Anynet+ device is properly connected.Check the cable connections of the Anynet+ device.Go to Anynet+ (HDMI-CEC) (메뉴/123 메뉴 System Anynet+ (HDMI-CEC))andsee if Anynet+ (HDMI-CEC) has been set to On.Check whether the TV remote control is in TV mode.Check whether the remote control is Anynet+ compatible.Anynet+ may not function when some other functions are active, including ChannelSearch, Smart Hub, Plug & Play, etc.If you have disconnected and then reconnected the HDMI cable, scan for devices againor turn your TV off and on.I want to start Anynet+.Check if the Anynet+ device is properly connected to the TV, and then select theAnynet+ (HDMI-CEC) (메뉴/123 메뉴 System Anynet+ (HDMI-CEC)) menu tosee if Anynet+ (HDMI-CEC) is set to On.I want to exit Anynet+. Select View TV from the Anynet+ menu.Select a non-Anynet+ device from the Source list.The message "Connectingto Anynet+ device..."or "Disconnecting fromAnynet+ device" appearson the screen.You cannot use the remote control when you are configuring Anynet+ or switchingto a viewing mode. Use the remote control after the TV has completed the Anynet+configuration or has switched to a viewing mode.The Anynet+ devicewon't play. You cannot use the play function when Setup is in progress.The connected device isnot displayed.Check whether the device supports Anynet+.Check whether the HDMI cable is properly connected.Go to Anynet+ (HDMI-CEC) (메뉴/123 메뉴 System Anynet+ (HDMI-CEC))andsee if Anynet+ (HDMI-CEC) has been set to On.Scan for Anynet+ devices again.Anynet+ devices must be connected to the TV using an HDMI cable. Make sure thedevice is connected to your TV with an HDMI cable. Some HDMI cables may notsupport Anynet+.If the connection is terminated because there has been a power failure or the HDMIcable has been disconnected, please scan for the device again.The TV audio is notbeing played through thereceiver.Connect an optical cable to the TV and the receiver.ARC enables the TV to output digital sound via the HDMI (ARC) port.However, ARC is only available when the TV is connected to an audio receiver thatsupports ARC.
