Samsung SMT-W5100E User Manual

Also see for SMT-W5100E: User guide User guide Quick user guide Quick setup guide

55SSID Setting1 [MENU] X 8. System Setting X [OK] X 9. SSID SettingX (Select Auto/Manual) X [OK]2 If you select Auto at Step 1, SSIDs are automatically searched.Select an SSID from the list of searched SSIDs.- Ask the system administrator which SSID should be selected.3 Select the Encryption Key mode.- If you have selected SSID Auto input at Step 1, you can registerthe handset without entering the encryption key depending onthe encryption key setting on the AP(Access Point).If an encryption key has not been enabled on the AP, Step 7 and8 will be skipped and the user will be directed to the registrationscreen automatically. If an encryption key has been enabled onthe AP, an automatic search will run to detect encryption mode,and will switch to an input screen of the relevant mode.- If the encryption mode is WEP: ASCII mode or HEX mode screenwill be displayed.- If encryption mode is WPA_PSK or WPA2_PSK: TKIP/AES modeis automatically recognized and an encryption input screen isdisplayed.- If Manual has been selected at Step 1, a screen is displayed asshown to the right.- As for its availability, refer to your system administrator.- In case a WEP key has been enabled, select ASCII Mode or HEXMode to enter the WEP Key.- In case a WPA_PSK or WPA2_PSK key has been enabled, selectAES Mode or TKIP Mode to enter the Encryption Key.